Mighty Hoop 4.375" (Round)

Please specify your embroidery machine model to ensure you receive the correct hoop for your machine

Mighty Hoops are lined with powerful rare-earth magnets, which creates an even, solid, effortless hooping experience, and are ideal for thicker, hard to hoop garments, and to prevent repetitive stress on the operator’s hands and wrists. When the upper hoop gets near the lower hoop, the magnets snap the two rings together, securing your garment quickly and firmly.

Because Mighty Hoops use powerful magnets, please read this disclaimer from the manufacturer before ordering to understand the risks involved.

This hoop has an inside dimension that is 4.375" round. That dimension is the same size as a standard Tajima 12cm hoop, as well as many other hoop brands. Please note that your actual sewing area will be determined by the size of your presser foot. Most machines will be able to sew approximately 3 3/8 to 3 5/8". This Mighty Hoop was designed for items like sleeves and cap backs. It was not made to hold thick and heavy items, like the original Mighty Hoops. It was designed with smaller magnets allowing it to have a smaller outer ring. This makes it easier to get into tight areas. It will not be able to hoop thick bags, workwear, leather, or other difficult fabric. The 4.25"square Mighty Hoop would be a better option for that type of embroidery. The 4.375" Mighty Hoop will fit most commercial embroidery machines, including the Brother and Baby Lock 6 and 10 needle machines.

The inside dimension of this hoop is 4 3/8" (4.375", or 111mm)

Actual sewing area depends on brand of machine
approximately 3.6" or 91mm